POF Hayling 1760

[Arne Schippers]

Ornholt, if I remember correctly Iplaced it that the flooring was as the same hight as the beam in the picture

Bad building instructions and non-existing drawings make it impossible to find the exact location. I estimated a likely location and put them there. Perhaps the right thing to do is to ask the manufacturer.

Kind regards Arne

 

[NOVICHOK]

Good night, dear forum members.I decided to show how I assembled the floor base of the aft cabin.after considering my steps, I decided to reverse the order of assembly.first, I installed the base of the spire.then I laid the extreme beams.I glued the props under them.in the end, I installed the middle beams.

 

[NOVICHOK]

Good evening.I have a problem.I'm confused.either I assembled the feed incorrectly or a short part.

 

[Ornholt]

Good evening.I have a problem.I'm confused.either I assembled the feed incorrectly or a short part.

View attachment 365052

[
ATTACH=full]365053[/ATTACH]

Check the angle of the frame to the stern. In the picture it looks like the stern leans too far back.

 

[NOVICHOK]

ОК.

 

[NOVICHOK]

Houston, we have a problem.I disassembled the knot and moved the stern.but then she gets up crookedly.do you have any close-up photos of this node?

 

[NOVICHOK]

Good evening.a new question.I assembled the racks for the windlass.but the design turns out to be higher by 5 mm.what should I do? Saw off the legs at the rack or lift the props?

 

[NOVICHOK]

Good afternoon. I continue to slowly make my boat.after I sawed the legs, all the details fell into place.laid the deck under the stove.That's it for now.

 

[NOVICHOK]

Good night comrades.I had some more fun with my boat.

 

[NOVICHOK]

Good evening.a new question.how to build a stove?I only solved such a bad drawing.can I see the manufacturing process in more detail?

 

[Arne Schippers]

Good evening.a new question.how to build a stove?I only solved such a bad drawing.can I see the manufacturing process in more detail?

View attachment 366992

 

[Arne Schippers]

In the manual there is a appendix at the end.

 

[NOVICHOK]

Thank you very much.this is not in my instructions.there is an opinion that she, the instruction, is cropped.

 

[NOVICHOK]

Good evening comrades.I have a new question.where are the details of the lining of the inner side ?

 

[Ornholt]

Good evening comrades.I have a new question.where are the details of the lining of the inner side ?

View attachment 367396

Strip 1x3 mm was in the kit. It's not pre-cut. (As I remember).

 

[NOVICHOK]

Good evening.thanks for the reply.there are no separate strips of wood in my set for the settlement.I will put my own.I have it, I bought it for the keel, there are extra ones left.I liked using a compass as a clamp.I bought it on AliExpress.I ordered a few more .they fit very well.they are cheap.

 

[NOVICHOK]

Good night. I had some free time and I worked out with the boat.assembled the windlass.in order to put a column with a stopper, I had to saw a beam.

 

[Stargazer]

I was wondering how this kit could be so affordable, but with as many problems I see you are having I guess the old saying is true…. You get what you pay for….but it is still looking great- you have great talent and skill Novichok!

 

[NOVICHOK]

Good night.thank you for your kind words.the set is good.a bad instruction spoils it.she's very weak.shows only the general direction.but it's only more interesting.the grinding of the case is coming to an end.I'll start doing the sheathing soon.

 

[NOVICHOK]

Assembled the spire.