Interesting working ships and vessels
Signed by Captain Clotworthy Upton [Captain seniority, 29 April 1802; Resident Commissioner, Naval Yard, Trincomalee].
www.rmg.co.uk
Signed by Brigadier-General Sir Samuel Bentham [Inspector of Naval Works, 1796-1806].
www.rmg.co.uk
Signed by William Rule [Surveyor of the Navy, 1793-1813], and Henry Peake [Surveyor of the Navy, 1806-1822].
www.rmg.co.uk
Most detailed drawings are existing about the Tank Vessel No. 1 (1837)
Scale: 1:48. A plan showing the body plan with stern board outline, sheer lines with inboard detail and midship framing, and longitudinal half-breadth for Tank Vessel No. 1 (1837), a two-masted Water Carrier built at Chatham Dockyard for service in Malta.
Scale: 1:24. A plan showing the midship section for Tank Vessel No. 1 (1837), a two-masted Water Carrier built for service in Malta.
Scale: 1:48. A plan showing the inboard profile, upper deck, and platforms and flats, for Tank Vessel No. 1 (1837), a two-masted Water Carrier built for service in Malta.
Signed by William Stone [Master Shipwright, Chatham Dockyard, 1830-1839]
Scale: 1:48. A plan showing the deck with after platform detail for Tank Vessel No. 1 (1837), a two-masted Water Carrier built at Chatham Dockyard for service in Malta.
Scale: 1:96. A plan showing the sail profile with mast and spar dimensions, and sail area, for Tank Vessel No. 1 (1837), a two-masted Water Carrier built for service in Malta.
www.rmg.co.uk
Signed: T. F. Hawkes [Master Shipwright, Plymouth Dockyard, 1837-1843].
www.rmg.co.uk
Signed: T. F. Hawkes [Master Shipwright, Plymouth Dockyard, 1837-1843].
www.rmg.co.uk
there are several additional drawings of water tank vessels existing, but unfortunately not uploaded, f.e.
42ft Water Vessel (1821) for Trincomalee
Scale: 1:24 and 1:48. A plan showing the body plan, longitudinal half-breadth, half-breadth deck plan, half section, and profile with framing elevation and full sail plan for a two-masted forty-three foot water vessel for Trincomalee, Celon.Signed by Captain Clotworthy Upton [Captain seniority, 29 April 1802; Resident Commissioner, Naval Yard, Trincomalee].
60ft Water Tank Vessel (1804)
Scale: 1:48. A plan showing the body plan, basic profile, and longitudinal half-breadth for a three-masted, cedar-built, copper-fastened, sixty foot water carrier for the Jamaica Station, as designed by Captain Andrew Fitzherbert Evans (seniority: 15 April 1798) under the auspices and direction of Rear Admiral Sor John Duckworth. Built at Bermuda under the inspection of Messers Goodrich & Sheldon, Merchants.60ft Water Tank Vessel (1804) | Royal Museums Greenwich
80ft Water Vessel (1796)
Scale: 1:48. Plan showing the body plan, sheer lines with inboard detail, and longitudinal half-breadth for a two-masted 80ft water vessel designed by Sir Samuel Bentham, and built at Tor Point near Plymouth.Signed by Brigadier-General Sir Samuel Bentham [Inspector of Naval Works, 1796-1806].
80ft Water Vessel (1796) | Royal Museums Greenwich
64ft Water Carrier (1806)
Scale: 1:48. A plan showing the body plan with stern board outline, modified sheer lines with inboard detail, longitudinal half-breadth, and midship section proposed [and approved] for a sixty-four foot water carrier (1806).Signed by William Rule [Surveyor of the Navy, 1793-1813], and Henry Peake [Surveyor of the Navy, 1806-1822].
64ft Water Carrier (1806) | Royal Museums Greenwich
Most detailed drawings are existing about the Tank Vessel No. 1 (1837)
Scale: 1:48. A plan showing the body plan with stern board outline, sheer lines with inboard detail and midship framing, and longitudinal half-breadth for Tank Vessel No. 1 (1837), a two-masted Water Carrier built at Chatham Dockyard for service in Malta.Scale: 1:24. A plan showing the midship section for Tank Vessel No. 1 (1837), a two-masted Water Carrier built for service in Malta.
Scale: 1:48. A plan showing the inboard profile, upper deck, and platforms and flats, for Tank Vessel No. 1 (1837), a two-masted Water Carrier built for service in Malta.
Signed by William Stone [Master Shipwright, Chatham Dockyard, 1830-1839]
Scale: 1:48. A plan showing the deck with after platform detail for Tank Vessel No. 1 (1837), a two-masted Water Carrier built at Chatham Dockyard for service in Malta.
Scale: 1:96. A plan showing the sail profile with mast and spar dimensions, and sail area, for Tank Vessel No. 1 (1837), a two-masted Water Carrier built for service in Malta.
Collection Results | Royal Museums Greenwich
Find objects, archive records and library items relating to your search, and use the filters to narrow down your results.
'Coronation' (1831)
Scale: 1:48. A plan showing the body plan with half stern board outline, sheer lines with some inboard detail, and longitudinal half-breadth for 'Coronation' (1831), a fifty-seven foot tank vessel, as taken off in July 1841.Signed: T. F. Hawkes [Master Shipwright, Plymouth Dockyard, 1837-1843].
'Coronation' (1831) | Royal Museums Greenwich
'Coronation' (1831)
Scale: 1:48. A plan showing the deck and tanks of the 'Coronation' (1831), a fifty-seven foot tank vessel, as taken off in July 1841.Signed: T. F. Hawkes [Master Shipwright, Plymouth Dockyard, 1837-1843].
'Coronation' (1831) | Royal Museums Greenwich
there are several additional drawings of water tank vessels existing, but unfortunately not uploaded, f.e.