Hi Everyone. What is the best covering for a work surface that you can Push pins into, to hold your work temporally?
Kurt Konrath
Kurt Konrath
Cork or Homasote works well to hold pins.
Maybe a sheet or part of a sheet of balsa or other soft wood.
Maybe a sheet or part of a sheet of balsa or other soft wood.
I USE THE WHITE POSTER BOARD GREAT FOR STICKING PINS IN. GOD BLESS STAY SAFE ALL DON
Homasote as mentioned above. You can get a self-healing table cover from a drafting supply store.
Cork squares is what I have used.
https://www.amazon.com/SUNGIFT-Cork...r_1_5?keywords=homasote&qid=1687009813&sr=8-5
https://www.amazon.com/SUNGIFT-Cork...r_1_5?keywords=homasote&qid=1687009813&sr=8-5
- Joined
- Jun 2, 2020
- Messages
- 59
- Points
- 68
Cheap easy-to-use ceiling tiles. Use the back side to pin your project.
Armstrong CEILINGS Scored 24 in. x 48 in. Tegular Ceiling Tile (80 sq. ft./Case) 9767 - The Home Depot
Armstrong Scored 2 ft. x 4 ft. tegular ceiling panels are scored to simulate the look of 2 ft. x 2 ft. panels. Scored panels are ideal for light commercial spaces. Installs in Armstrong Prelude 15/16 in. Suspended Ceiling Installation System.
www.homedepot.com
also, what about foam core
I found some 1/2" thick cardboard that was large enough to use as a build board for a stick and tissue airplane and am now using t for my Cutty Sark model. Works great and cheap. Find some place that sells corrugated boxes to get this size.