![612.jpg 612.jpg](https://shipsofscale.com/sosforums/data/attachments/305/305168-6bd775fb94ae3842e6e6ba5ebc7cbe8a.jpg)
I searched the net looking for pics of the bunker lids, the pic above is of the Lydia Eva approx 1920
steam drifter, which shows a very slight circular pattern, i have a better pic of it but it is an Alamy
pic which is copy wright so I don't know if I can post it here,
![613.jpg 613.jpg](https://shipsofscale.com/sosforums/data/attachments/305/305169-df4fb6b8a9e9e28dcc72836c72da3c4a.jpg)
These next pics are of some various models and they also show the ring pattern,
![614.jpg 614.jpg](https://shipsofscale.com/sosforums/data/attachments/305/305170-62296e0615188bc6b4b93badd17231e5.jpg)
and this one,
![615.jpg 615.jpg](https://shipsofscale.com/sosforums/data/attachments/305/305171-7ddb724668014f95d43663ccdbc4fed1.jpg)
This one is of the Imara Tug boat that I built and they also show the circular pattern,
![616.jpg 616.jpg](https://shipsofscale.com/sosforums/data/attachments/305/305172-9f5dfc3aa954874c8c171176da043e5f.jpg)
This is a nice resin bunker lid, they were quite cheap but the shipping from America was too dear,
![617.jpg.jpg 617.jpg.jpg](https://shipsofscale.com/sosforums/data/attachments/305/305175-5f6676f92eec88d1ae3abb87e16d7f25.jpg)
These cast metal ones I found at Float a Boat and i bought four each of the ones with the X next to them, hope fully they will be ok,
thanks for looking in,
best regards john.
.