Jabeque Cazador ,1/60 Occre [COMPLETED BUILD]

Heinrich said:
Very good overall effect. I think that you are most successful in creating a very different variation to the ones I have seen in other builds. You are a master with a paintbrush/airbrush in hand and it really shows in your exceptionally clean paint work. Well done. A very blessed Christmas and a healthy 2022 to you and your family.
Click to expand...
Thank you Heinrich for your kind words, I also wish you a beautiful Christmas for you and your family, thank you again and a hug from Cádiz, Spain.
 
I just love your build with its vivid colors. A very Happy and Healthy New Year to you and your family as well my friend!
 
Hello everyone, progress these days, making the jack davit, cannon ports and adding some elements to the deck.IMG_20220118_183546.jpgIMG_20220118_183442.jpgIMG_20220118_183504.jpgIMG_20220118_183519.jpgIMG_20220118_183451.jpgIMG_20220118_183553.jpg


In the Amati Xebec, they have some reinforcements on the stern so that the stern floor rests, I have copied it but I am going to put it as an ornament on the stern.
IMG_20211226_181925~2.jpgIMG_20211229_115119.jpgIMG_20211229_180337.jpgIMG_20211229_180447.jpgIMG_20220116_193253.jpgIMG_20220118_184048.jpgIMG_20220118_183822.jpgIMG_20220118_184034.jpgIMG_20220118_183814.jpgIMG_20220118_183708.jpg

IMG_20220118_183632.jpg
 
The extra ornamentation at the stern is beautiful, but those sheaves that you used in the davits are my favorite - so realistic!
 
Looks great! I love the stern decoration you added! I see you did not taper the top of the cathead?
 
Lologaditano said:
Hi all. This is the week job. Placement of the gratings, stanchion, stringers and finish painting the hull. I hope you like it.

MERRY CHRISTMAS TO ALL.View attachment 277780View attachment 277781View attachment 277782View attachment 277783View attachment 277784View attachment 277785View attachment 277786
Click to expand...
I think that from the prior comments, those of us like your work, but the real question in my mind is how it is seen in your own mind as to what you intended, achieved, and direction that you will follow. Very precise work from your hands . . . even with the pace of the work. This will be a reward to follow to the final launching. Rich (PT_2)
 
Lologaditano said:
Hello everyone, progress of this week, placing the railing, varnishing the deck with matt varnish, finishing the rudder and placing it.View attachment 282473View attachment 282474View attachment 282475View attachment 282476View attachment 282477View attachment 282478View attachment 282479View attachment 282480View attachment 282481View attachment 282482View attachment 282483
Click to expand...
New log page, new year, and new production. To my eyes, in the photos, the contrasting colors have a good balance overall. Rich (PT-2)
 
Lologaditano said:
Hello everyone, progress these days, making the jack davit, cannon ports and adding some elements to the deck.View attachment 283958View attachment 283959View attachment 283960View attachment 283961View attachment 283962View attachment 283964


In the Amati Xebec, they have some reinforcements on the stern so that the stern floor rests, I have copied it but I am going to put it as an ornament on the stern.
View attachment 283978View attachment 283979View attachment 283980View attachment 283981View attachment 283982View attachment 283983View attachment 283984View attachment 283985View attachment 283986View attachment 283987
Click to expand...
Good morning- beautiful. I absolutely love it. Well done thus far.
 
Ptèr said:
Looks great! I love the stern decoration you added! I see you did not taper the top of the cathead?
Click to expand...
Hi Ptèr, now that you mention it, I hadn't looked closely at the photograph and you're right, it has a taper, I'll try to take them off if I can without breaking anything, thanks for your appreciation.
 
Lologaditano said:
Hi Ptèr, now that you mention it, I hadn't looked closely at the photograph and you're right, it has a taper, I'll try to take them off if I can without breaking anything, thanks for your appreciation.
Click to expand...
Maybe it's not necessary to take them off...you can use a flat needle file to get the job done. The wood is easily workable with a sharp needle file and won't take long at all. I use these files for all the shaping of my wood, and really appreciate these tools. Good luck and glad to help! :)

1642591608996.png
 
Hello again everyone, thanks to Ptèr's observation, I was able to correct the mistake made with the winch, since I had to lower the rear part of it. Since I couldn't take it off, I lowered it with the Dremel and then adjusted it With the file and sandpaper, I think it turned out well, I await your comments.IMG_20220118_183519~2.jpgIMG_20220119_102504.jpgIMG_20220119_104623.jpgIMG_20220119_104846.jpgIMG_20220119_115227.jpgIMG_20220119_115321.jpgIMG_20220119_115236.jpg
 
You must log in or register to reply here.
Back
Top