- Joined
- Apr 1, 2019
- Messages
- 453
- Points
- 373
That must be a sheet of Cnc cut parts illuminated from the back with a red light,the red light comes thru at the already Cnc cut slotsWhat are those red pieces on the black background?
you are bit me again, Zoly!! you are replying with the lightning speed!That must be a sheet of Cnc cut parts illuminated from the back with a red light,the red light comes thru at the already Cnc cut slots
Red lightining!! Lolyou are bit me again, Zoly!! you are replying with the lightning speed!
You may suggest both Qi Gang and Hongbin become members of our forum! They can open their independent build logs. The more Alert build logs- the better!Qi Gang is a ship model Cai enthusiast who was commissioned by us to test. The version he tested is the official version, basically with KIT. He may add some details that he likes, I will point out in particular. In our five stages, we commissioned five enthusiasts to test and show you the two most representative systems.
You may suggest both Qi Gang and Hongbin become members of our forum! They can open their independent build logs. The more Alert build logs- the better!
Side grain is produced by a special tool, about 0.15mm, which can be easily removed.Very interesting photos - hope to see much more of the model and the work by the modeler.
A very good step, that you "test" and pre-assemble the kit by different modelers.
I have one question to the shown frames:
View attachment 100755
When we look at them we can see some parallel "stripes". -> Is this the grain of the timber?
Or what I guess, are these the marks of the cnc-cut, or? - so after final sanding they will disappear - Am I correct?