I have always liked the battleships of the First World War, especially the Germans, but I did not find what I was looking for, there were some at 1/350 scale, but they were small, then there were the gpm ones on paper, but it was not exactly what What I wanted, and then the mz modellbau models at 1/100 scale, too expensive for me, so in the end I thought about making one from the gpm ones, changing paper for plastic and wood, searching through the gpm on the internet I came up with this What if I was interested
I had doubts because I had never seen something like this, but from the photos it seemed promising, so I ended up buying it and a few days ago I received it, it has cost me 420 euros plus 33 customs so it's not bad, comparing it with the closest thing there is , the trumpeter kits to which you have to add some set of improvements such as photo-etched parts, barrels and wooden cover, here everything comes, plus the accessories to build it motorized for rc
It seems that it is made with a 3d printer, and it does not have the quality of one in plastic, but it is not so bad
Well, having said all this, I start the presentation
the box as it arrived
inside two boxes with the photo-etched parts, parts of the cover and the instructions
the two halves of the hull, which contain the small parts and the parts of the superstructure as well as the propeller shafts, the horns and some other accessories, everything is wrapped in bubble wrap, the packaging is not very elaborate
the two halves together, almost a meter long
the stern above and below
the bow, top, bottom and side
different parts of the superstructure, chimneys and small parts
artillery towers and boats
some parts of the covers
1/200 SMS Seydlitz Battlecruiser RC Ship Model Kit with Detail Upgrade Set CY514 | eBay
SMS Seydlitz was a battlecruiser of the German Kaiserliche Marine (Imperial Navy), built in Hamburg. She was ordered in 1910 and commissioned in May 1913, the fourth battlecruiser built for the High Seas Fleet.
www.ebay.com
It seems that it is made with a 3d printer, and it does not have the quality of one in plastic, but it is not so bad
Well, having said all this, I start the presentation
the box as it arrived
inside two boxes with the photo-etched parts, parts of the cover and the instructions
the two halves of the hull, which contain the small parts and the parts of the superstructure as well as the propeller shafts, the horns and some other accessories, everything is wrapped in bubble wrap, the packaging is not very elaborate
the two halves together, almost a meter long
the stern above and below
the bow, top, bottom and side
different parts of the superstructure, chimneys and small parts
artillery towers and boats
some parts of the covers