- Joined
- Aug 10, 2017
- Messages
- 1,646
- Points
- 538
This project is based on the Original drawing and details from the book Legend of the Lake. Zoltan suggested this area for cross section as shown in the first photo
The model will be a navel board style with stub masts and exposed framing to show internal details.
When I made some preliminary layouts of the area of the Ontario to be modeled. I had a problem understanding the original draughtsman numbering system for his station lines, I renumbered them in a conventional format for the model.
The section will have 21 double frames.
Model Dimensions
Length: 16.25”
Width: 11”
Height: 12”
Drawings: The drawings will be made available from SOS when the model is finished.
Keel Assembly:
The keel assembly is made from European beechwood, I used a scroll saw to cut out the pieces and hand files to finish the notches and joints along with the keelson. This is some progress photos.
.
The model will be a navel board style with stub masts and exposed framing to show internal details.
When I made some preliminary layouts of the area of the Ontario to be modeled. I had a problem understanding the original draughtsman numbering system for his station lines, I renumbered them in a conventional format for the model.
The section will have 21 double frames.
Model Dimensions
Length: 16.25”
Width: 11”
Height: 12”
Drawings: The drawings will be made available from SOS when the model is finished.
Keel Assembly:
The keel assembly is made from European beechwood, I used a scroll saw to cut out the pieces and hand files to finish the notches and joints along with the keelson. This is some progress photos.
.