Maybe white also?
Maine Peapod 1:14 Model Expo Build log. [COMPLETED BUILD]
- Thread starter Rob444
- Start date
- Watchers 9
-
- Tags
- completed build
beautiful boat!
The hull after several airbrushed coats of Tamyia white paint.
You can note someones finger in the upper left corner.
You can note someones finger in the upper left corner.
You can note someones finger in the upper left corner.
The painted lobster trap airbrushed with some light gray and earth tones.
You know I have seen that same finger in alot of my pictures!You can note someones finger in the upper left corner.
“There are only two colors to paint a boat, black or white, and only a fool would paint a boat black.” — Nathanael Greene Herreshoff
Lookin' good!
Preparing to paint the inside I used some masking tape to shield the exterior from any over spray.
Last edited:
The inside was sprayed a dark tan.
I removed the masking tape as fast as possible to prevent the tape from ripping away the white paint. The mahogany rub rails have still not been attached.
the stained seats were again test fitted into the hull to see how the colors worked out.
Looks great Rob
Thanks!! Away for the weekend to see the grandkids and hopefully view the eclipse!
Installing the mahogany rub rails. The mahogany is definitely stiffer than the boxwood but after soaking it in hot water it conformed to the sides easily.
Looking great!
Using Tamyia tape, I masked off the area I want painted green then hand painted 2 coats of Tamyia flat green. I needed to touch up a few areas where the green paint bled through but that went easily.
I used minwax polyacrylic to varnish the mahogany rub rails and the seats. I put in the lobster trap and oars and the boat was complete!
Great looking boat Rob!
Cool oars and lobster trap!
Good morning Rob. Well done. A very effective Peapod and looks realistic. Cheers Grant