Falls of Foyers

shipbuilder

Well-Known Member
Moderator
Joined
Jun 30, 2012
Messages
511
Points
63

Location
Great Britain
#2
Hello Anja,
Yes, the Falls of Foyers does have furled sails. It takes just as much time as having them set, because each one has still to be made and then furled on top of the yards. The hull of the ship was iron, making this type of vessel very unpopular for model shipbuilders.
Bob
PS
Thanks for e-mail :D
 

cog

Member
Joined
Dec 4, 2012
Messages
159
Points
16

Location
Empe, Gelderland
#3
shipbuilder said:
Hello Anja,
Yes, the Falls of Foyers does have furled sails. It takes just as much time as having them set, because each one has still to be made and then furled on top of the yards. The hull of the ship was iron, making this type of vessel very unpopular for model shipbuilders.
Bob
PS
Thanks for e-mail :D
Metal hull is unpopular, because they can't plank ... or to dificult to mimic/duplicate?
 

shipbuilder

Well-Known Member
Moderator
Joined
Jun 30, 2012
Messages
511
Points
63

Location
Great Britain
#4
Thanks Carl,
Plating is about 500 times easier than planking, especially in miniatures. Because plating of real ships was done (in the past) with raised and sunken plating strakes, it is only necessary to put spaced paper strips on the hull. Falls of Foyers, being waterline, was plated in about ten minutes!

Making miniatures is really a lot easier than big ones as long as you use special techniques.
Bob
 
Top