Search results

  1. Norway

    Workshops My shipyard/your shipyard

    @Steef66, Question, what is your experience with your scheppac band saw, is it precise enough for ex planks and what thickness of material can be saw. Greetings Knut
  2. Norway

    Kingfisher 1770 1:48 POF

    Like the jig to adjust the underside of the deck beams, the brass tube length gauge- WONDERFUL, the pictures are saved in my tips folder, Thanks-
  3. Norway

    Purchased shortly ago / sthg new in your workshop -> present it here

    @Artin, Prooxon has a lot of good tools, if they don't deliver to Canada then I would go for the (Byrnes) thickness sander, which is very popular here at SOS, i think it is more accurate than a Prooxon and, I would think Byrnes ships to Canada since they are made in the USA, Good luck-
  4. Norway

    KERZ ATAO - 1/33

    @Kerz Atao F14800 , great, I saved the pictures, now I just have to find materials to make this milling jig, thanks for sharing, regards Knut-
  5. Norway

    KERZ ATAO - 1/33

    @Kerz Atao F14800 , This is the one I mean. This looks like a simple and practical solution for this job. Do you have any pictures of this construction? I'd like to try making one myself, thanks- Greetings Knut-
  6. Norway

    KERZ ATAO - 1/33

    @Kerz Atao F14800 , I like your solution on angle milling table, it looks like a good solution if you can set the degrees accurately enough. Possibly this solution can be used together with the Prooxon milling machine Do you have more pictures of this construction. Greetings Knut-
  7. Norway

    La Belle 1/36 - Plan by Jean Boudriot / myself

    @Steef66 , @Olivers Historic Shipyard , thanks for the good advice, now it will be tried, greetings Knut-
  8. Norway

    La Belle 1/36 - Plan by Jean Boudriot / myself

    Hi Oliver, I also want to be able to print parts of a PDF drawing, such as the different parts of a frame/bow, I have an HP scanner/laser printer which I want to use to print out paper templates to make the different parts. The question is - which PDF program do you use, can you explain how you...
  9. Norway

    La Belle - Hachette Partwork - 1/30 scale

    @jack.aubrey, is it possible to buy these colors online and how much does the product smell after application. In the past, there has been talk of the product CLOU here at SOS, which I believe smells/gasses for up to several days. Greetings Knut-
  10. Norway

    POF L'Amarante Corvette de 12 canons 1744 1:36 (Ancre Monograph- Gérard Delacroix) By Shota

    Here in Norway, the fake keel is called a worm board, a thick layer of tar was smeared between the keel and the board with the intention that the worms always attack the lower part of the keel first, it is, as previously said, much easier to replace.
  11. Norway

    Saint Albans 1687 in Navy Board Style - 1 : 48 scale [COMPLETED BUILD]

    Congratulations, thank you for a nice and educational experience during the construction of this wonderful model, regards Knut-
  12. Norway

    Other hobbies that are not ship model building

    HMM, ride a motorbike in a national park, it's not legal in Norway, here we can only ride to national parks.
  13. Norway

    POF L'Amarante Corvette de 12 canons 1744 1:36 (Ancre Monograph- Gérard Delacroix) By Shota

    @shota70 , well explained, I have a laser printer with scan function, I want to try the same as you, the only problem is that glass plate/scanning surface is recessed about half a cm into the table itself, what does your scanner look like, thanks-
  14. Norway

    POF L'Amarante Corvette de 12 canons 1744 1:36 (Ancre Monograph- Gérard Delacroix) By Shota

    @ Shota, can you tell me how you make the plans/drawings you will use to build the jig, I wonder if you scan them from a normal scanner or if you have scanned the entire drawing to PDF and used cut and paste functions, I'm very green when it comes to these features, I've already scanned four...
  15. Norway

    HMS ALERT 1777 cutter POF by shota70 [COMPLETED BUILD]

    Congratulations from me and, nice building story from beginning to end, greetings Knut-
  16. Norway

    Szkutnik - New Products FIGUREHEADS FOR MODELS - CNC MILLING / 3D PRINT - for private orders

    Fantastic, do you have pictures of these decorations finished printed, interesting to see what color you use on the resin you use when printing these figures.
  17. Norway

    JOLLIE BRISE

    Thanks-
  18. Norway

    Rattlesnake Figurhead

    Thanks friends, I really appreciate your congratulations, been away from model building for quite a while now, I'm working a lot on house renovation at the moment. But, I follow SOS every day, there is always a lot of exciting things going on here, greetings Knut-
  19. Norway

    Hello from Norway

    Velkommen fra en annen Normann, hilsen Knut-
Back
Top