San Felipe 1690 - Panart

This Build Log Section is for Wood Ships. Enter your Build Log here. It is advisable for others to follow your Build Log to start your post such as "Build Log: HMS Ship name"

Moderators: zoly99sask, Aussie048

User avatar
carlosys
Petty Officer Third Class
Petty Officer Third Class
Posts: 57
Joined: Thu Jan 03, 2013 5:18 pm
Location: Tarragona (Spain)
Contact:

Re: San Felipe 1690 - Panart

Post by carlosys » Sun Aug 11, 2013 3:51 am

Hello
We continue with the gun ports.

To make things easier, once the plant properly located in the town, proceed to mark in a "dirty" various loopholes to get dirty location, but quite real.

Image

Image

The next step is to take measurements of the shafts and start drawing each of the 49 pockets ... but to make things easier, we will abuse the technology.
First with autocad do I serve matrix template and then print it on transparent paper adhesive. This way, I save a lot of time.

Image

Image

So are restated the pockets. Now back to pull drill, cutter and patience ....

Image

Image

Regards
Carlosys Ship Modeling________________________________________________________________________
Completed:J.S. Elcano | Diorama Bote Auxiliar Nepo | Frigate Diana | King of Mississippi | Bot de Llum
Current build: San Felipe 1690 de Panart

User avatar
Donnie
Master Chief Petty Officer
Master Chief Petty Officer
Posts: 2148
Joined: Sun Aug 21, 2011 6:42 pm
Location: Madison, MS
Contact:

Re: San Felipe 1690 - Panart

Post by Donnie » Tue Aug 13, 2013 9:26 am

Excellent templates (using AutoCad I see). Very nice Carlos - I am jealous - I should have used the CAD to do my templates too. Fantastic idea there. (just kidding about the jealous part) :razz:

Donnie
Donnie
Image
Current Build: Panart San Felipe 1:75
Completed Build: Santisima Trinidad

Main SOS Site: Ships of Scale Website

"War Ships are safe at harbor, but that is not what they were made for"

User avatar
carlosys
Petty Officer Third Class
Petty Officer Third Class
Posts: 57
Joined: Thu Jan 03, 2013 5:18 pm
Location: Tarragona (Spain)
Contact:

Re: San Felipe 1690 - Panart

Post by carlosys » Tue Aug 13, 2013 11:05 am

Donnie wrote:Excellent templates (using AutoCad I see). Very nice Carlos - I am jealous - I should have used the CAD to do my templates too. Fantastic idea there. (just kidding about the jealous part) :razz:

Donnie
Thanks Donnie. I if I have jealous of your fantastic job with the Santísima Trinidad :D :D

Regards
Carlosys Ship Modeling________________________________________________________________________
Completed:J.S. Elcano | Diorama Bote Auxiliar Nepo | Frigate Diana | King of Mississippi | Bot de Llum
Current build: San Felipe 1690 de Panart

User avatar
carlosys
Petty Officer Third Class
Petty Officer Third Class
Posts: 57
Joined: Thu Jan 03, 2013 5:18 pm
Location: Tarragona (Spain)
Contact:

Re: San Felipe 1690 - Panart

Post by carlosys » Thu Aug 15, 2013 3:25 am

Hello
I finished the task of gun ports.
All gun ports tinted walnut.
Now looks like a ship to moles, haha

Image

Detail tinted walnut gun port
Image

Image

I opted to make the second planking with 10 cm segments.
The idea is to do with that lining the gun ports within which in theory should fit the window. As I finish about half a millimeter before lined hollow gun port.

Image

Regards
Carlosys Ship Modeling________________________________________________________________________
Completed:J.S. Elcano | Diorama Bote Auxiliar Nepo | Frigate Diana | King of Mississippi | Bot de Llum
Current build: San Felipe 1690 de Panart

popeye
Master Chief Petty Officer
Master Chief Petty Officer
Posts: 2074
Joined: Sun Aug 21, 2011 6:27 pm
Location: manchester, N.H.
Contact:

Re: San Felipe 1690 - Panart

Post by popeye » Tue Aug 20, 2013 6:59 pm

nice work on the gun ports......they look good and straight :)

Post Reply

Return to “SOS Build Logs from Kits - Wood”