San Felipe 1690 - Panart

This Build Log Section is for Wood Ships. Enter your Build Log here. It is advisable for others to follow your Build Log to start your post such as "Build Log: HMS Ship name"

Moderators: zoly99sask, Aussie048

User avatar
carlosys
Petty Officer Third Class
Petty Officer Third Class
Posts: 57
Joined: Thu Jan 03, 2013 5:18 pm
Location: Tarragona (Spain)
Contact:

Re: San Felipe 1690 - Panart

Post by carlosys » Sat Apr 20, 2013 2:06 am

Hi
I'll start with the gun ports on the port side.
To do this I placed masking tape over the area where the gun ports go to dial without fear.
The gun ports review has to be done so that it is symmetrical and aligned.
Eventually, after some hours staking is done. Now it start drilling and cutting. "Only" are 49 per port and starboard 49 :? so I will have a few days entertaining.

Image

Image

Image

Image

Image

Image

Regards
Carlosys Ship Modeling________________________________________________________________________
Completed:J.S. Elcano | Diorama Bote Auxiliar Nepo | Frigate Diana | King of Mississippi | Bot de Llum
Current build: San Felipe 1690 de Panart

User avatar
GaryM
Senoir Chief Petty Officer
Senoir Chief Petty Officer
Posts: 1566
Joined: Mon Jan 30, 2012 8:27 pm
Location: Citrus Heights, California

Re: San Felipe 1690 - Panart

Post by GaryM » Sat Apr 20, 2013 2:46 pm

Looking pretty nice. Great job.
Happy modeling,
Gary Maple

Problems are just challenges waiting for your solution.

Current build: Sergal Sovereign of the Seas
In Que: Sergal: Cutty Sark and Amerigo Vespucci; Billings Titanic
Completed: Amati: HMS Prince (old 1:78 version); Billings: Norske Love and Vasa; Mantua: La Couronne; Sergal: Mississippi Riverboat and La Soleil Royal

StevieF
Petty Officer Second Class
Petty Officer Second Class
Posts: 147
Joined: Thu Oct 11, 2012 9:05 am
Location: Enland, West Country

Re: San Felipe 1690 - Panart

Post by StevieF » Sat Apr 20, 2013 3:02 pm

Looking very good!
I like the idea with the masking tape to mark the gunports, consider that tip copied!!
With my Sovereign build I am led to believe that the provided decking planks will be lime wood, .5x5mm. I intend to use tanganyika .5x3mm, in a three shift system.
Keep the updates coming, you should have a very good looking model when it's finished
All the best, Steve.. :text-thankyouyellow:

cog
Petty Officer Second Class
Petty Officer Second Class
Posts: 200
Joined: Tue Dec 04, 2012 6:37 am
Location: Empe, Gelderland

Re: San Felipe 1690 - Panart

Post by cog » Sun May 05, 2013 6:05 am

As you, I haven't been around lately, due to personal circumstances. However, you have made some major advancement. I like the way you did your decks - have to keep that one in mind - and also the method for the gun ports.
Cheers,
Carl

Current build:
Kit
Dolphyn - Corel

Scratch
Sea Witch

Next build: (on the shelf) Arno XI

popeye
Master Chief Petty Officer
Master Chief Petty Officer
Posts: 2074
Joined: Sun Aug 21, 2011 6:27 pm
Location: manchester, N.H.
Contact:

Re: San Felipe 1690 - Panart

Post by popeye » Mon May 06, 2013 7:29 pm

that's some really neat stuff you've done there! ;)......nice planking!

User avatar
Donnie
Master Chief Petty Officer
Master Chief Petty Officer
Posts: 2143
Joined: Sun Aug 21, 2011 6:42 pm
Location: Madison, MS
Contact:

Re: San Felipe 1690 - Panart

Post by Donnie » Fri May 10, 2013 2:11 pm

Eccellent method of layout on the Gun Ports, etc. Very nice progress - some really good workmanship here !!! :greetings-clapyellow:
Donnie
Image
Current Build: Panart San Felipe 1:75
Completed Build: Santisima Trinidad

Main SOS Site: Ships of Scale Website

"War Ships are safe at harbor, but that is not what they were made for"

User avatar
carlosys
Petty Officer Third Class
Petty Officer Third Class
Posts: 57
Joined: Thu Jan 03, 2013 5:18 pm
Location: Tarragona (Spain)
Contact:

Re: San Felipe 1690 - Panart

Post by carlosys » Sun Jun 23, 2013 1:25 pm

Thank you very much to all for your comments :text-thankyouyellow:

Apologize for the last few weeks of absence. I've been (and I) quite busy at the gigs and I can not devote many hours these days.
I started with the gun ports port and the idea was to let these facts loopholes frames with some "depth" to make it look once painted the effect of "bulk" of the hull, since the wall at that point is only 1 , 5mm.
The problem begins in the implementation of these frameworks. I tried 1mm (too thin), 2mm (too thick) .. I made a template, mold, etc ... but were not exactly the same.

The idea is to make a square tube frames far and go mode cutting slices. In this way, everyone is equal and then with the second liner, dissimulation possible defects in the pocket.
Now I only doubt what color I paint the frame ... red, walnut, etc ...

With picture is clearer but not much mystery.

This is what you need to get

Image

The wood that will square tube and gluing process. This helped me a aluminum profile measures slightly smaller, but perfectly aligns the slats.

Image

Image

Image

Image

Image

Image

With the circular saw (gift :) ) cut the "slices" of the gun ports

Image

Image

Here the first of 13x11 port side. Those that are not done yet deck the area that are somewhat larger.

Image

Image

Simulation second plank
Image

Image

Regards
Carlosys Ship Modeling________________________________________________________________________
Completed:J.S. Elcano | Diorama Bote Auxiliar Nepo | Frigate Diana | King of Mississippi | Bot de Llum
Current build: San Felipe 1690 de Panart

edmay
Petty Officer Third Class
Petty Officer Third Class
Posts: 65
Joined: Wed Feb 20, 2013 12:20 am

Re: San Felipe 1690 - Panart

Post by edmay » Tue Jul 16, 2013 12:19 am

Hello Carlos,I will be getting this model soon,and will follow your log in a third row seat if you do not mind,your Felipe is neatly built,good photo"s and clearly explained,the method used for your gunports is brilliant,thank you for the learning.Happy modeling . Edwin .http://www.shipsofscale.com/phpBB3/post ... f=52&t=341#

User avatar
Donnie
Master Chief Petty Officer
Master Chief Petty Officer
Posts: 2143
Joined: Sun Aug 21, 2011 6:42 pm
Location: Madison, MS
Contact:

Re: San Felipe 1690 - Panart

Post by Donnie » Mon Jul 29, 2013 3:37 pm

Carlos,
Now - that is some clean work done on those port frames ! Very nicely executed ! What kind of table saw ?

Donnie
Donnie
Image
Current Build: Panart San Felipe 1:75
Completed Build: Santisima Trinidad

Main SOS Site: Ships of Scale Website

"War Ships are safe at harbor, but that is not what they were made for"

User avatar
carlosys
Petty Officer Third Class
Petty Officer Third Class
Posts: 57
Joined: Thu Jan 03, 2013 5:18 pm
Location: Tarragona (Spain)
Contact:

Re: San Felipe 1690 - Panart

Post by carlosys » Sun Aug 11, 2013 3:48 am

Donnie wrote:Carlos,
Now - that is some clean work done on those port frames ! Very nicely executed ! What kind of table saw ?

Donnie
Thanks Donnie. The table saw is very simple. The PROXXONKS-230

Regards
Carlosys Ship Modeling________________________________________________________________________
Completed:J.S. Elcano | Diorama Bote Auxiliar Nepo | Frigate Diana | King of Mississippi | Bot de Llum
Current build: San Felipe 1690 de Panart

Post Reply

Return to “SOS Build Logs from Kits - Wood”