Halifax Build Log: Lumberyard

This Build Log Section is for Wood Ships. Enter your Build Log here. It is advisable for others to follow your Build Log to start your post such as "Build Log: HMS Ship name"

Moderators: Aussie048, zoly99sask

Post Reply
donfarr
Petty Officer First Class
Petty Officer First Class
Posts: 298
Joined: Wed Jan 09, 2013 10:42 am

Re: Halifax Build Log: Lumberyard

Post by donfarr » Tue Aug 22, 2017 1:24 pm

Happy you are back Dave, a couple of questions for you, you SAID THAT FOR WHATEVER LEGAL REASONS THAT THE PLANS WERE DISTORTED, can I still take the mesurments off the plans, when I first put together theKEEL ASSEMBLY IT WAS QUITE A BIT OFF FROM THE PLANS, what do I do,....also I elected to put the KEEL ASSEMBLY IN PLACE WIT FRAMES No. A AND V(first and last whole frame) and CLAMPED THE FRAMES TO THE KEEL NOTCHES,.....then adjusted the frames to the jig, mostly pulled up from the bottom of the jig, this would not matter as the frames eventually get cut off from the jig itself,....but would it not change the mesurments to underside of CAP RAIL AND THE WALE ITSELF,,,,,,pictures forth comming, NEED YOUR HELP ON THIS AND THE CANT FRAME BEVELING,...I JUST CAN NOT SEEM TO GET THAT THROUGH MY ANCIENT MIND, looking forward to your help. Don

donfarr
Petty Officer First Class
Petty Officer First Class
Posts: 298
Joined: Wed Jan 09, 2013 10:42 am

Re: Halifax Build Log: Lumberyard

Post by donfarr » Wed Aug 23, 2017 3:13 pm

Hi everyone, showing progress to date, all whole frames complete in place, have quite a bit of fairing to do yet, and stern half frames, and stem cant frames to install
Attachments
20170823_202112[1546].jpg
20170823_202112[1546].jpg (128.61 KiB) Viewed 190 times

User avatar
admin
Site Admin
Posts: 163
Joined: Wed Jun 27, 2007 4:33 am
Location: Madison, MS
Contact:

Re: Halifax Build Log: Lumberyard

Post by admin » Wed Aug 23, 2017 9:01 pm

didit,

You might want to go back and re upload some images that I noticed were missing. They are on the post that has these:

id23.jpg
id25.jpg
fed72.jpg
ed73.jpg
halifax 2_edited-1.jpg
angle 1.jpg
gap1.jpg
s2.jpg
s1.jpg
Donnie Driskell
Ships of Scale ©2017
Madison, MS
USA
Owner / Operator / Administrator
admin@shipsofscale.com

Thank you again for your membership and interest.
You do make a difference in the community of Ship Builders !

donfarr
Petty Officer First Class
Petty Officer First Class
Posts: 298
Joined: Wed Jan 09, 2013 10:42 am

Re: Halifax Build Log: Lumberyard

Post by donfarr » Fri Aug 25, 2017 11:20 am

OK starting to post pictures
Attachments
20170817_220045[1525].jpg
Showing a mistake and how I corected it,this is Frame No. 9, showing it wrong, takeing it apart by using nail polish remover with 100 per cent acetone, using cotton swab on the joints and an ezato blade got it apart with no damage re-did the frame corectly, this is wgat happens when you are to tired to do modeling work
20170817_220045[1525].jpg (122.57 KiB) Viewed 158 times

donfarr
Petty Officer First Class
Petty Officer First Class
Posts: 298
Joined: Wed Jan 09, 2013 10:42 am

Re: Halifax Build Log: Lumberyard

Post by donfarr » Fri Aug 25, 2017 11:50 am

so now I know it is working again, here are the posts showing progress and questions
Attachments
20170823_201854[1547].jpg
cant frames No. 5, 6, and 7 dry fitted, is this correct once I get it into rabbit, do I nedd any beveling yet
20170823_201854[1547].jpg (281.6 KiB) Viewed 152 times
20170823_200247[1551].jpg
stern off center, will fix it when installing the half frames by pushing them in
20170823_200247[1551].jpg (181.3 KiB) Viewed 152 times
20170823_195055[1552].jpg
side view wit half frame No. W dry fitted
20170823_195055[1552].jpg (183.06 KiB) Viewed 152 times
20170823_195339[1557].jpg
whole frames attached to keel
20170823_195339[1557].jpg (313.28 KiB) Viewed 152 times
20170823_195443[1556].jpg
whole frames installed to keel and jig
20170823_195443[1556].jpg (277.76 KiB) Viewed 152 times

donfarr
Petty Officer First Class
Petty Officer First Class
Posts: 298
Joined: Wed Jan 09, 2013 10:42 am

Re: Halifax Build Log: Lumberyard

Post by donfarr » Mon Aug 28, 2017 11:03 am

Where are the pictures for these items how do I get them up. DON

donfarr
Petty Officer First Class
Petty Officer First Class
Posts: 298
Joined: Wed Jan 09, 2013 10:42 am

Re: Halifax Build Log: Lumberyard

Post by donfarr » Mon Aug 28, 2017 11:07 am

I AM REFERING TO didits posts(FOR 8/22) need to know how to open the pictures on these items. DON

User avatar
Aussie048
Petty Officer First Class
Petty Officer First Class
Posts: 498
Joined: Mon Jun 27, 2016 11:32 pm
Location: Melbourne Australia

Re: Halifax Build Log: Lumberyard

Post by Aussie048 » Mon Aug 28, 2017 10:30 pm

Hi Don

We need Didit to fix those as we do not have the photos. If you or Didit has the photos or you emailed me with them I could fix the posts.

Cheers
Geoff
Current Build Link:-
Mamoli - USS Constitution
HMS Triton Section Poseidon section

On Hold Builds:-
Santa Maria
Norfolk Sloop Delxue

Member
Ship Modelling Society of Victoria

neptune
Petty Officer First Class
Petty Officer First Class
Posts: 313
Joined: Thu May 25, 2017 8:09 am
Location: Adelaide, South Australia.
Contact:

Re: Halifax Build Log: Lumberyard

Post by neptune » Wed Aug 30, 2017 6:17 am

G'day Don, finally getting a bit of time to catch up on some builds, this is a beautiful little Schooner, I just love the framing you are doing, will you be leaving the hull open, ( no planks ) below the wales,

best regards John.

didit
Seaman
Seaman
Posts: 37
Joined: Fri Jun 30, 2017 7:38 pm

Re: Halifax Build Log: Lumberyard

Post by didit » Wed Aug 30, 2017 8:08 am

donfarr wrote:
Mon Aug 28, 2017 11:07 am
I AM REFERING TO didits posts(FOR 8/22) need to know how to open the pictures on these items. DON
I just looked back and I can see all the photos in the 8/22 post
I am away from home right now gone on vacation for the next 10 days
dave

Post Reply

Return to “SOS Build Logs from Kits - Wood”